Stinger

At present moment I use Bonehead Gunner helmet, and camera is mounted by means of sticky pad only, but additionaly is protected by string attached to the helmet to the chin tape .... just in case riser hits the camera , what sometimes happens.At present moment the mount is dissembled as I am doing some tuning of the mount to put the camcorder closer to the helmet.I am doing that by grinding of the mount to obtain a shape of the helmet I have spare adhesive .Skyhook is really great system .... this year 2009 I have already used it two times .

This rig is equiped with SkyHook system. That is why reserve opened so quickly with no need to use reserve release handle.

I use only HD mode, angle of view is much wider.

I wouldnt say it was bad lack .... but a friend of mine had much more luck .... canopy landed over the entrance to our drop zone restaurant .... were we spent our free time as you can see on the picture attached httpwww.polishfreefly.comGALERIAstronyPT_12.06.2009.html14

Thanks for the tip ..... during this flight I was much more concentrated on controlling the suit than on making movies .... next time will be better

That correct .... somebody has to jump with the tandem or skydiver ..... that is why I am not present on my movies

Yes it is Sometimes it is cold, wet or even freezing .... depends on circumstances

The camera is mounted by means of adhesive mount and additional string to the chin cup tape .... just in case

Well ..... we all are jumping from the same altitude 4000 m above ground level, but when experience is increasing we are opening lower for experienced skydivers at this drop zone the lowest limit is 1000 m AGL and flying on smaller parachutes

It might be too low .... in that day clouds were about 200 m AGL, so I did not like to take the risk of low opening .... in some cases main parachute may not open like you expect ....

I like climbing, but so far I do this on artificial climbing walls only .... there are no such a nice places in my neighbourhood